RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.
| Recommended Printing Settings | |
| Drying Settings (Blast Drying Oven) | 55 °C, 8 h |
| Printing and Keeping Container's Humidity | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature | 220 - 230 °C |
| Bed Temperature (with Glue) | 35 - 45 °C |
| Printing Speed | < 200 mm/s |
| Physical Properties | |
| Density | 1.22 g/cm³ |
| Vicat Softening Temperature | N / A |
| Heat Deflection Temperature | N / A |
| Melting Temperature | 190 °C |
| Melt Index | 6.4 ± 1.2 g/10 min |
| Mechanical Properties | |
| Tensile Strength | N / A |
| Breaking Elongation Rate | N / A |
| Bending Modulus | N / A |
| Bending Strength | N / A |
| Impact Strength | N / A |
Printing Tips
• Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture. For more details please refer to: Filament drying instructions on WIKI.
What's in the Box
Filament with Spool*1 & Desiccant*1
Filament Label*1
Package*1
Attribute Comparision
| Support for PLA | Support for PA/PET | |
| Color | White & Black | Green |
| Nozzle Temperature | 210-230°C | 270-290°C |
| Bed Temperature | 35-45°C | 80-100°C |
| Print Speed | <200mm/s | <100mm/s |
| Water Soluble | No | No |
| Recommended for | PLA | PA6-CF,PAHT-CF,PA-CF, PA-GF, PET-CF |
| Cannot be used with | PA-CF, PA-GF, PET-CF, ABS, PETG, TPU, ASA | PLA, ABS, PETG, TPU, ASA |
1. Support filament cannot be used to print an item alone, but only to print the supporting portion of that item. AMS is recommended for multi-material printing with Bambu Support filament.
2. Bambu Support filament can only be used with compatible temperatures and filament types. Failure to follow these guidelines can lead to clogs or other issues.
General Inquiry
Technical Support