Bambu Lab


$24.99 USD

Tax excluded. Actual tax rate varies by country/region

✔ AMS Compatible
Color: ABS Blue
Shipped from Chinese warehouse
Free Shipping on orders
(excluding printers and AMS)
● over $49 (standard and economy shipping )
● over $150 (expedited shipping)
14-Day Refund Service, 30-Day Replacement Service
You may cancel order within two hours of submitting your order. For complete details, read our ORDER CANCELLATION
abs abs

RFID for Intelligent Printing

All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System).

Load and print! No more tedious setting steps.

abs abs

Recommended Printing Settings
Drying Settings before Printing 80 °C,8 h
Printing and Keeping Container's Humidity < 20% RH (Sealed,with Desiccant)
Nozzle Temperature 240 - 270 °C
Bed Temperature (with PVP Glue) 80 - 100 °C
Printing Speed < 300 mm/s
Physical Properties
Density 1.05 g/cm³
Vicat Softening Temperature 94 °C
Heat Deflection Temperature 87 °C
Melting Temperature 200 °C
Melt Index 34.2 ± 0.7 g/10 min
Mechanical Properties
Tensile Strength 41 ± 1 MPa
Breaking Elongation Rate 10.5 ± 1.0 %
Bending Modulus 1880 ± 110 MPa
Bending Strength 68 ± 3 MPa
Impact Strength 39 ± 3.6 kJ/m²

What's in the Box:

abs filament abs filament

Filament*1 & Desiccant*1

abs filament abs filament

Instructions*1 & Spool Sticker*1

abs filament abs filament


abs filament abs filament

Filament Label*1

图片加载失败文案 图片加载失败文案

Print Your Own Spool Now

Bambu Lab 3D printer comes with a spool model. Print Spool Part 1&2 from the build-in files!

图片加载失败文案 图片加载失败文案

2.If you don't have the spool model in your printer,

Instructions for Printed Spool

abs filament abs filament

When you're finished printing, you will have a wide piece (1x), narrow piece (1x), spacing shim (2x).

abs filament abs filament

Find the locator (a tiny block on the wide piece). Align it with the notch on the inner ring of the filament roll. Insert the wide piece into the filament roll.

abs filament abs filament

Step 1. Insert the narrow piece and align the groove of each piece inside of the spool until it is pushed firmly into the wide piece.

Step 2. Once it is pushed firmly into the wide piece, rotate the narrow piece clockwise until it slides into place and you hear it lock.

abs filament abs filament

Step 1. Make sure the spacing shim is installed inside the spool (under the triangle).

Step 2. Tear apart and pull out the plastic strips.

Learn more about swapping the new filament with Bambu Reusable Spool on Wiki, Click Here.